Apparatus Case and Control Units for 1993 Mercedes-Benz 400SEL
No.
Part # / Description / Price
Price
6
Housing 
Mercedes-Benz
Mercedes-Benz Notes: As of ident. no.:
A 290167
EXCEPT CODE 805
ALSO INSTALLED IN VEHICLE TO A 290166 WITH CODE 806
Description: Apparatus case.
12
Cap Mercedes-Benz
Mercedes-Benz Notes: As of ident. no.:
A 290167
EXCEPT CODE 805
ALSO INSTALLED IN VEHICLE TO A 290166 WITH CODE 806
Description: Apparatus case.
23
Screw Mercedes-Benz
Mercedes-Benz Description: Cover to apparatus case. M5X25
Diameter: 5mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm. Mounting, tank. Grab handle to roof rear rail,inside. Roller blind mounting. Bracket mounting.
Diameter: 5mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm. Mounting, tank. Grab handle to roof rear rail,inside. Roller blind mounting. Bracket mounting.
38
Screw Mercedes-Benz
Mercedes-Benz Description: Fastening electric motor. M5X30
Diameter: 5mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm. Engine fixing. Cable tray to apparatus case. Turn signal lamp to fender. Door separation point, rear.
Diameter: 5mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm. Engine fixing. Cable tray to apparatus case. Turn signal lamp to fender. Door separation point, rear.
$9.26
$9.26
39
Holder Mercedes-Benz
Mercedes-Benz Notes: NO LONGER AVAILABLE
As of ident. no.: A 290167 EXCEPT CODE 805 ALSO INSTALLED IN VEHICLE TO A 290166 WITH CODE 806
As of ident. no.: A 290167 EXCEPT CODE 805 ALSO INSTALLED IN VEHICLE TO A 290166 WITH CODE 806
Description: Control unit.
40
Hexagon Head Bolt Mercedes-Benz
Mercedes-Benz Notes: As of ident. no.:
A 290167
EXCEPT CODE 805
ALSO INSTALLED IN VEHICLE TO A 290166 WITH CODE 806
Description: Amplifier at c-pillar. Amplifier to bracket. Reinforcem. At bracket, left.
$5.15
$5.15
41
Holder Mercedes-Benz
Mercedes-Benz Notes: As of ident. no.:
A 290167
EXCEPT CODE 805
ALSO INSTALLED IN VEHICLE TO A 290166 WITH CODE 806
Description: Control unit in apparatus case.
42
Holder Mercedes-Benz
Mercedes-Benz Notes: As of ident. no.:
A 290167
EXCEPT CODE 805
ALSO INSTALLED IN VEHICLE TO A 290166 WITH CODE 806
Description: Cable harness on equipment compartment.
53
Hexagon Head Bolt Mercedes-Benz
Mercedes-Benz Description: Main muffler suspension. M8x16. Central muffler suspension. Bracket on rear axle m 8x16.
$4.75
$4.75
57
Hexagon Head Bolt Mercedes-Benz
Mercedes-Benz Notes: As of ident. no.:
A 290167
EXCEPT CODE 805
ALSO INSTALLED IN VEHICLE TO A 290166 WITH CODE 806
Description: M6x20. At air conditioner case or heater case.
$5.15
$5.15
59
Cap Screw Mercedes-Benz
Mercedes-Benz Description: Lower steering shaft to upper steering shaft. M8X35
Diameter: 8mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1mm. To separation point. Torsion bar to bracket. Bracket to caliper. Bracket to oil filter.
Diameter: 8mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1mm. To separation point. Torsion bar to bracket. Bracket to caliper. Bracket to oil filter.
$6.00
$6.00
74
74
Fuse Mercedes-Benz
Mercedes-Benz Description: Fuse to fuse box. Blade fuse ATO. Engine compartment, 15 amp. Interior, 15 amp.
$6.25
$6.25
77
Control Unit Mercedes-Benz
Mercedes-Benz Notes: AS OF IDENT. NO., INTEGRATED IN CONTROL UNIT, ETS/ASR TRACTION SYSTEM
77
Control Unit Mercedes-Benz
Mercedes-Benz Notes: NO LONGER AVAILABLE
Description: Only used with acceleration skid control (asr).
$387.10
$387.10
80
Remanufactured Control Unit 1 Mercedes-Benz
Mercedes-Benz Notes: PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
80
Remanufactured Control Unit 1 Mercedes-Benz
Mercedes-Benz Notes: PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
81
$3,878.35
111
Control Unit 1 Mercedes-Benz
Mercedes-Benz Notes: PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
IMPORTANT:FOLLOWING INSTALLATION,CONTROL UNIT MUST BE PROGRAMMED USING HAND-HELD TESTER!
VERSION CODE CAN BE COMPARED TO DATA IN FDOK SYSTEM (FADON). IF A VERSION CODE IS NOT IDENTIFIABLE,IMMEDIATELY ORDER A NEW PART BY STATING ES1 26 AND IDENT NO.
IMPORTANT:FOLLOWING INSTALLATION,CONTROL UNIT MUST BE PROGRAMMED USING HAND-HELD TESTER!
VERSION CODE CAN BE COMPARED TO DATA IN FDOK SYSTEM (FADON). IF A VERSION CODE IS NOT IDENTIFIABLE,IMMEDIATELY ORDER A NEW PART BY STATING ES1 26 AND IDENT NO.
111
Control Unit 1 Mercedes-Benz
Mercedes-Benz Notes: PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
IMPORTANT:FOLLOWING INSTALLATION,CONTROL UNIT MUST BE PROGRAMMED USING HAND-HELD TESTER!
VERSION CODE CAN BE COMPARED TO DATA IN FDOK SYSTEM (FADON). IF A VERSION CODE IS NOT IDENTIFIABLE,IMMEDIATELY ORDER A NEW PART BY STATING ES1 26 AND IDENT NO.
IMPORTANT:FOLLOWING INSTALLATION,CONTROL UNIT MUST BE PROGRAMMED USING HAND-HELD TESTER!
VERSION CODE CAN BE COMPARED TO DATA IN FDOK SYSTEM (FADON). IF A VERSION CODE IS NOT IDENTIFIABLE,IMMEDIATELY ORDER A NEW PART BY STATING ES1 26 AND IDENT NO.
111
Shift Mechanism Egs Mercedes-Benz
Mercedes-Benz Notes: As of ident. no.:
A 290167
EXCEPT CODE 805
ALSO INSTALLED IN VEHICLE TO A 290166 WITH CODE 806
NOT PROGRAMMABLE WITH HAND HELD TESTER
NOT PROGRAMMABLE WITH HAND HELD TESTER
Description: Es1 26.
111
Control Unit 1 Mercedes-Benz
Mercedes-Benz Notes: PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
IMPORTANT:FOLLOWING INSTALLATION,CONTROL UNIT MUST BE PROGRAMMED USING HAND-HELD TESTER!
VERSION CODE CAN BE COMPARED TO DATA IN FDOK SYSTEM (FADON). IF A VERSION CODE IS NOT IDENTIFIABLE,IMMEDIATELY ORDER A NEW PART BY STATING ES1 26 AND IDENT NO.
IMPORTANT:FOLLOWING INSTALLATION,CONTROL UNIT MUST BE PROGRAMMED USING HAND-HELD TESTER!
VERSION CODE CAN BE COMPARED TO DATA IN FDOK SYSTEM (FADON). IF A VERSION CODE IS NOT IDENTIFIABLE,IMMEDIATELY ORDER A NEW PART BY STATING ES1 26 AND IDENT NO.
1 This price excludes a refundable manufacturer's core charge. Add the part to your cart to see the core charge.